13. INSTALLATION DETAILS

Print 

Section 13. Installation Details is available for download only in PDF format.

Figure 1 – Pre-Formed Pipe Insulation Multiple Layer Construction

Figure 2 – Flexible Closed Cell Pipe Covering

Figure 3 – Field and Factory Applied Non-Metal Jacketing

Figure 4 – Field Applied Metal Jacket

Figure 5 – Standard and Split Ring Hangers

Figure 6 – Clevis Hanger High Density Inserts

Figure 7 – Pipe Shoe on Roller Support

Figure 8 – Traced Piping

Figure 9 – Insulation Support Rings / Expansion Contraction Joints

Figure 10 – Pre-Formed Elbow Insulation

Figure 11 – Mitred Insulation Elbow Over-Sized Application

Figure 12 – PVC / Glass Fibre Elbow Insulation System

Figure 13 – Field or Factory Fabricated Valve Insulation

Figure 14 – PVC / Glass Fibre Valve Insulation

Figure 15 – In-Line Flange Insulation Built-up and Beveled

Figure 16 – PVC / Glass Fibre Coupling or In-Line Flange Insulation System

Figure 17 – Flexible Duct Insulation on Rectangular Ducts Indoors

Figure 18 – Rigid Duct Insulation on Rectangular Exposed Ducts Outdoors

Figure 19 – High Temperature Block or Board Insulation

Figure 20 – Vessel Bottom Head, Leg, Skirt Insulation and Securement

Figure 21 – Pipe and Tube Exchangers – Encased

Figure 22 – Large Diameter Vertical Vessels Block and Blanket Insulation

Figure 23 – Large Diameter Horizontal Vessels Insulation Support and Securement

Figure 24 – Flexible Closed Cell Sheets

Figure 25 – Extreme Temperature Vessels Block Insulation

Figure 26 – Small Diameter Vessels / Exhaust Pipe Covering

Figure 27 – Field Applied Lining

Figure 28 – Curved Surfaces Rigid Board Insulation

Figure 29 – Nozzles and Insulation Manways

Figure 30 – Blocks and Pre-Formed Pipe Insulation Around Breechings and Exhaust Ducts

Figure 31 – Head Insulation, Securement and Cover Fabrication

Figure 32 – Piping

Figure 33 – Fittings

Figure 34 – Flexible Insulation Blankets

Figure 35 – Removable and Reusable Insulation

Figure 36 – Removable Insulated Metal Equipment Covers

Figure 37 – Removable and Reusable Insulation

Figure 38 – Elastometric Removable Covers

Figure 39 – Typical Fire Stop Components for Floor Expansion Joint

Figure 40 – Typical Fire Stop Components for Floor Explansion Joint

Figure 41 – Typical Fire Stop for Wall Penetrations

Figure 42 – Typical Fire Stop for Wall Penetrations

Figure 43 – Typical Fire Stop for Wall Penetrations

Figure 44 – Typical Fire Stop for Wall Penetrations

Figure 45 – Typical Fire Stop for Wall Penetrations

Figure 46 – Typical Fire Stop for Deflection of Metal Stud Walls

Figure 47 – Typical Fire Stop Components for the Top of the Masonry Wall